Desk phones and headsets

Pair a Bluetooth headset or AirPods with a Yealink phone

Pair a Bluetooth headset, such as Apple AirPods, with your Yealink desk phone to make and take calls on it. This works on Yealink desk phones that have Bluetooth: the T53W, T54W and T57W have it built in, and other models with a USB port can add it with an adapter.

Before you start

Check that your phone has Bluetooth:

PhoneBluetooth
T53W, T54W, T57WBuilt in
T53, and T4-series phones with a USB port, such as the T46S, T48S and T46UNeeds a Yealink BT41 Bluetooth adapter, plugged into the USB port on the back of the phone

Without Bluetooth, the menu of the phone has no Bluetooth item, or the phone finds no devices.

Put the headset in pairing mode

Each headset has its own way, often holding its power or Bluetooth button until a light flashes: check its manual. For AirPods:

  1. Put both AirPods in their charging case and keep the lid open.
  2. Press and hold the setup button on the back of the case until the status light flashes white. On AirPods with no button on the case, such as AirPods 4, double-tap the front of the case instead.

Pair the headset with the phone

  1. On the phone, press the Menu soft key (the soft keys are the keys under the screen).
  2. Open Basic > Bluetooth. On some phones the path is Settings > Basic Settings > Bluetooth.
  3. Set Bluetooth to On and press the Save soft key. The phone looks for Bluetooth devices nearby.
  4. If your headset isn’t listed, press the Scan soft key.
  5. Highlight your headset and press the Connect soft key. On a T57W, tap the name of the headset. A Bluetooth icon at the top of the screen shows that it is connected.

Use the headset on a call

Press the HEADSET key on the phone, the key with a headset symbol, to turn on headset mode: the calls you make or answer then use the Bluetooth headset. During a call, press the HEADSET key to move the call to the headset, press the speaker key to move it to the speaker, or lift the handset.

To answer from the headset itself, and for sound problems once it is connected, see Use a headset with a Yealink phone.

Note: AirPods connect to one device at a time. While they are connected to the desk phone, your iPhone uses its own speaker until you switch the AirPods back in the Bluetooth settings of the iPhone.

The phone doesn’t find the headset

  1. Check that the headset is in pairing mode. On AirPods, the status light flashes white.
  2. Bring the headset close to the phone.
  3. For AirPods, close the case for 10 seconds, open it, and hold the setup button until the light flashes white again. Then press Scan on the phone.
  4. If the menu of the phone has no Bluetooth item, the phone needs a BT41 adapter: see “Before you start”.
Share
Was this article helpful?

Spotted something to improve in this article?